Team E – System Requirements Document

Overview

System Requirements Document (SRD)

The URD validation criteria are used to inform the development of detailed acceptance criteria contained within the System Requirements Document (SRD) which must be sufficiently comprehensive to provide assurance that the capability requirements will be met under all operational conditions. The SRD is often used to develop the Integrated Test and Acceptance Plan (ITEAP), which details how compliance with each SRD requirement will be demonstrated.

Task Description

Your team must now develop SRD requirements, building upon on the Scenario Description and your URD requirements.

Part 1 – Develop SRD

Using the:

• Your URD table your developed previously is provided below
• The scenario description,
• This generic architecture diagram

Populate the SRD table with Safety Requirements, noting that:

• • • Each URD Safety Requirement should have one or more associated SRD Safety Requirements
    • Additional URD Safety Requirements may need to be added, to support SRD requirements identified later in the acquisition process.

To help develop a set of SRD Safety Requirements to support the workshop, you may want to include some of the following URD requirements in your SRD table.

• • • The system shall be developed to recognised safety standards
    • The Target Safety Objective for the project shall be <1E-6 catastrophic repercussions per year
    • All risks shall be reduced to at least Tolerable Levels that are ALARP
    • The system shall be safe to operate at all expected pressures (<20bar>8bar)
    • The system shall provide for safe & environmentally compliant disposal of non oil product (Gas and Water)
    • The system shall comply with applicable safety legislation
    • The system shall be able to be isolated from the well head within 10 seconds
    • The system shall be able to be isolated from the tanker within 10 seconds
    • The system shall includes means to prevent overpressure

The system shall includes means to prevent over pressure

URD Table (previously populated)

SRD Table (To be populated)

DO NOT progress on to Part 2 until you have completed the development of the OIl SSTS SRD.

Part 2 – Assess Technical Solutions

Hint: Once your SRD table has been finalised, refresh your browser before moving on to Part 2, otherwise your SRD requirements will not appear in the drop down list.

With the completed SRD, use the table below to assess the three technical proposals against your requirements and propose an initial best candidate based on requirement compliance. [Each SRD requirement will appear in the drop down box]